Shenzhen Ritai Industrial Equipment Co., LTD. Acid and alkali resistant magnetic pump life extension method?

2022-07-27 0 By

Shenzhen Ritai Industrial Equipment Co., LTD. Acid and alkali resistant magnetic pump life extension method?I believe that many people have questions, today Shenzhen Ritai Industrial Equipment Co., Ltd. with you to answer it!We use the acid-alkali resistant magnetic pump, which is a new type of pump that uses the magnetic force of permanent magnets to achieve non-contact transmission of torque, that is, when the motor drives the outer rotor (that is, the outer magnet) component to rotate, the magnetic force line drives the inner rotor (that is, the inner magnet) component and the impeller to rotate synchronously through the magnetic field.The flow channel is made of acid and alkali resistant materials, which can transport acid, alkali, oxidant and other corrosive media with arbitrary concentration (strength). The isolation sleeve is made of special materials with high strength and mechanical properties, which can eliminate the magnetic eddy current phenomenon in the acid and alkali resistant magnetic pump.In order to prolong its service life, we need to use it correctly, and regular maintenance and maintenance.Acid and alkali resistant magnetic pump life extension methods are as follows: 1, start and stop equipment and equipment operators in the boot before cleaning up the debris to ensure the safety of the boot.Before starting, we should inject the liquid to be delivered into the pump (in order to prevent dry grinding caused by idling), open the inlet valve, close the outlet gate valve and turn on the power supply.Turn on the power and check whether the pump works normally.After 5 minutes of trial operation, it shall be divided into several groups and put into operation. If there are abnormal phenomena, it shall not be put into operation.2, safety shutdown when we want to stop to cut off the power supply before, should close the outlet gate valve;3, emergency shutdown when an emergency occurs we should immediately stop the motor, and then close the outlet valve and the inlet valve;4, regular maintenance and maintenance of acid and alkali resistant magnetic pump pump body, motor and other important parts to regular inspection and maintenance.Clean the flow channel in the pump regularly to ensure no residual liquid;Cut off the power supply with dustproof cover and take dustproof measures.Check the outlet and outlet to prevent foreign matter from entering the pump body and damaging it.Note that the normal temperature of the conveying medium is below 80 degrees to prevent damage to the sealing ring of the pump body.For the high head of the acid and alkali resistant magnetic pump, it is recommended to install a check valve on the outlet pipeline, so as not to damage the pipeline valve suddenly closed.To close, close the first drain valve and then cut off the pump power.Periodically check whether the power cord water, power cord loose off.Must strictly follow the starting direction of the indicator plate rotation, counterclockwise rotation and idling is strictly prohibited.Pay attention to wearing parts and replace them when worn or damaged.The above is shenzhen Ritai Industrial Equipment Co., LTD. Xiaobian to introduce to you Shenzhen Ritai Industrial Equipment Co., LTD. Acid and alkali resistance magnetic pump life extension method, I hope you look after help!