Automobile air conditioning inspection and maintenance skills inventory

2022-05-22 0 By

Check the air conditioner periodically. 1. Check whether the compressor belt is in good condition.If the surface of the belt and the belt pulley groove contact side bright, and start the air conditioning there is a “squeak” noise, indicating that the belt skidding serious should be replaced belt and pulley;If the belt is too loose, it should be adjusted, otherwise it is easy to make the air conditioning system poor refrigeration.2. Clean air vents and the cab of dust and dirt frequently.This is not only good for the beauty of the car, but also good for the health of the driver and passengers.3. Check that the refrigerant is sufficient.This can be measured by feeling the temperature difference between the inlet and outlet lines of the dryer, or by measuring with the manifold pressure gauge.4. Periodically check whether the refrigerant level of the air conditioner is normal.There are several ways to check the level of liquid, but the most common and easiest way is to use the peephole of the dryer.Glass peephole is usually installed on the lid of the dryer, motor and air conditioning systems, through the glass peephole observation of refrigerant flow situation, if the air conditioner works well, should from the peephole see clear frozen juices flow constantly, and still occasionally with small bubbles, when high temperature when turn off the air conditioning system can see small bubbles.5. Clean the condenser often.Frequent cleaning of the surface of the automobile condenser can timely and conveniently emit the heat generated by the vehicle to the outside world, especially regular cleaning of the surface of the condenser, can greatly improve the refrigeration effect of the air conditioning system.Therefore, as the owner, you need to clean the condenser often, but pay attention not to knock down the condenser radiator when cleaning, not to damage the pipe.The event will run from February 20, 2022 to February 28, 2022